Products

CEDAR DNS One, DNS2000 and DNS3000 Remote Control Software and Control System downloads

[ DNS Software] [ DNS Firmware]

Except where noted, Mac OS X versions of the DNS RCS and DNS CS are universal binaries compatible with all single-processor and multi-processor PPC-based and Intel-based Macintosh computers.

Windows versions of DNS RCS and DNS CS require Windows XP (SP2) or later.

Required firmware upgrades for the DNS2000 are included in the RCS/CS distribution. Firmware upgrades for the DNS3000 are available below.


DNS CS (Control System) introduced February 2010

Requires DNS2000 firmware v7 and DNS3000 firmware v1.0.7 or higher except where shown.

Version 6 (CEDAR Studio AAX & VST)

· Windows 7 and onwards
· Mac OS X 10.6.8 - onwards

Included in v6 of CEDAR Studio AAX, and VST, compatible with Pro Tools 10 & 11 and VST v2.4 hosts. Registered DNS users can obtain this free of charge by contacting support@cedaraudio.com.

Version 5.3 (CEDAR Studio AAX)

· Windows 7 and onwards
· Mac OS X 10.6.8 - 10.8 (Intel)

Included in v5.3 of CEDAR Studio AAX, which is compatible with Pro Tools 10 & 11. Registered DNS users can obtain this free of charge by contacting support@cedaraudio.com.

Version 4.3.0 (CEDAR Studio)

· Windows XP (SP2) and onwards
· Mac OS X 10.5.8, - 10.8 (Intel)

Included in v4.3 of CEDAR Studio. Compatible with Pro Tools 8, 9 & 10. Registered DNS users can obtained this free of charge by contacting support@cedaraudio.com.

Version 4.2.0 (CEDAR Studio)

For:
· Windows XP (SP2) and onwards
· Mac OS X 10.5.8, - 10.7 (Intel)

Included in v1.0.2 of CEDAR Studio. Registered DNS users can obtained this free of charge by contacting support@cedaraudio.com.

Version 4.1.0

For:
· Windows XP (SP2) and later
· Mac OS X 10.5 - 10.6 (Intel)
· Mac OS X 10.4 and later (PPC)

Supports DNS One, DNS3000 and DNS2000 processors on Pro Tools® v7.4, v8, and v9.

Version 4.0

For:
· Windows XP (SP2)
· Mac OS X 10.5.8 and later

Supports DNS One, DNS3000 and DNS2000 on Pro Tools® v7.4 and v8.x systems. In V4.0, DNS One does not support PPC-based Macs. PPC support for DNS One is added in V4.1.0 and later. Requires DNS2000 firmware v7 and DNS3000 firmware v1.0.6 or higher.

DNS RCS (Remote Control Software) - replaced by DNS CS (above)

Version 3.2.4

For Windows XP (SP2) and Mac OS X up to 10.5.x

Supports DNS3000 and DNS2000 processors on Pro Tools® v7.x and v8.x.

Requires DNS2000 firmware v6 and DNS3000 firmware v1.0.4 or higher.

Version 3.2.3

For Windows XP (SP2) and Mac OS X up to 10.5.5

Supports DNS3000 and DNS2000 processors on Pro Tools® v7.x and v8.x.

Requires DNS2000 firmware v6 and DNS3000 firmware v1.0.4 or higher.

Version 3.2

For Windows XP (SP2) and Mac OS X up to 10.5.5

Adds support for DNS3000 processors on Pro Tools® v7.x.

Requires DNS2000 firmware v6.

Version 3.1

For Windows XP (SP2) and Mac OS X 10.4.x

Adds support for Microsoft Windows XP(SP2)

Requires DNS2000 firmware v6.

Version 3.0.2

For Mac OS X 10.4.X

Adds support for Pro Tools® v7.x

Requires DNS2000 firmware v3 or higher.

Version 2.0

For Mac OS X up to 10.4.5

Adds support for Pro Tools® v 6.x

Requires DNS2000 firmware v3 or higher. DNS2000 v3 is also compatible with RCS v1.1 and OS9.x, but the firmware upgrade must be performed under Mac OS X.

Version 1.1

 

For Mac OS 9.x

Required for Pro Tools|HD with Pro Tools version 5.3 or above

Version 1.0

     

Initial release



CEDAR DNS1500 and DNS3000 Firmware downloads

Version 1.0.7

For Windows XP onward and Mac OS X

DNS1500 and DNS3000 V1.0.7 Firmware

Version 1.0.6

For Windows XP onward and Mac OS X

DNS1500 and DNS3000 V1.0.6 Firmware

Version 1.0.5

For Windows XP onward and Mac OS X

DNS1500 and DNS3000 V1.0.5 Firmware


DNS2000 Firmware download

Version 1.0.7

For Windows XP onward and Mac OS X

DNS2000 V1.0.7 Firmware


Back to DNS1500    ·    Back to DNS3000